Produces straight sections, Outer curves and inner curves in 7mm Scale
Casting works better with our Tuffcast as it is a hard plaster or you can cast with fast cast polyurethane resins in all our silicone moulds
To cut your plaster casts, use a rule and score the surface, then just snap the tile. for Resin casts we recommend extracting the part after around 30 minutes. the cast will be soft and can easily be cut with a sharp knife, then lay flat and allow to fully set
Product Overview
Castingmould. Cast these moulds with our Tuffcast casting powder or Herculite or even polyurethane Resin to make custom casts that can be used to make model railway buildings. See all our other Model making moulds and build up your collection to extend your building capabilities.
Casting is easy, just mix your preferred plaster, with water, pour into the casting mould, level off with a spatula and allow to dry for around 1 hour. Extract your parts from the mould and repeat to build up a stock of building parts. Then glue together with PVA glue or superglue if using resin casted parts.
