Historical Church Building 3 Mould kit- BHC-Kit02 - For model Railways OO Gauge

Historical Church Building 3 Mould kit- BHC-Kit02

This is a 3 mould full church building base kit (BHC05, BHC07, BHC08)

Produces heritage historical church building sections that can be used on all you models or in conjunction with our BHC (British Historical Churches) range. This base 3 mould kit enables you to build you main church building to any size you want by adding sections. 

Please note, you will require one of our roof moulds, as we have several to choose from in our OO Scale range, we also have a tower and spires kit if required (Sold separately)

Main Sections and dimensions

• BHC05 Front / Back Sections
  • Height 93mm - Width 76mm
• BHC07 Side Sections
  • Abutment and Section 39.5 Wide x 50 mm Tall
  • Additional Section 33 Wide x 50 mm Tall
• BHC08 Door Sections
  • 39.5 Wide x 50 mm Tall

Please check our related products in the BHC range.

We  produce many more in BH range, that provides the highest level of detail, please check out all our other products in the BH (British Historical) Premium Range series, to see all the amazing buildings that can be made.

For best results we recommend casting in resin and we also recommend using DWR plastics online 

We also provide many building ideas and plans online, if you are looking for some inspiration and remember you can build many more models using the parts as they will be compatible and interchangeable. 

Please note, this is an OO Scale mould.

• Easy to cast
• Easy to extract
• Re-usable silicone mould
• Realistic Scenery and buildings
• Cast with Plaster or resin
• Easy to clean and store

Product Use

Please ensure you wash and dry your casting mould before use, to remove any packing residue. Our casting moulds are made of the highest quality silicone and are suitable for resin casting 

Cast these moulds with Fastcast or slow cast resin to make custom casts that can be used to make model buildings. See all our other Model making moulds and build up your collection to extend your building capabilities.

Casting is easy, just mix your preferred plaster, with water, pour into the casting mould, level off with a spatula and allow to dry for around 1 hour. If using resin mix equal parts of the resin liquid, stir and pour.

Extract your parts from the mould and repeat to build up a stock of building parts. Then glue together with PVA glue if casting in plaster or superglue if using resin casted parts.

You can make a range of buildings, we suggest you lay out all the parts before gluing so you can see how your new building will look. We also have FREE building plans as well as tutorials online to help you get the most out of this amazing building medium.